customer service hotline : 86-755-86026786

stock code:603063

Banner
products and solutions
2.5MW Wide Frequency Domain Grid Simulation System

2.5MW Wide Frequency Domain Grid Simulation System

contact now

2.5MW Wide Frequency Domain Grid Simulation System

Features:

1. Independent control of three phase voltage and high overload capacity, assuring simulation of various grid variation and low voltage faults.

2. 32-bit DSP-based real time and intelligent control, with high accuracy of waveform and slew rate control, excellent steady and dynamic performance.

3. Simple and intuitive HMI, providing higher operation efficiency.
4. Support 60Hz grid simulation for exporting wind turbine set testing.


If you want to know some information about our company,pls check our website: www.hopewindelectric.com


Subject : 2.5MW Wide Frequency Domain Grid Simulation System

Related Product
  • Wide Frequency Domain Grid Simulation System 7.5MW Wide Frequency Domain Grid Simulation System

    7.5MW Wide Frequency Domain Grid Simulation System Features: 1. Independent control of three phase voltage and high overload capacity, assuring simulation of various grid variation and low voltage faults. 2. 32-bit DSP-based real time and intelligent control, with high accuracy of waveform and slew rate control, excellent steady and dynamic performance. 3. Simple and intuitive HMI, providing higher operation efficiency. 4. Support 60Hz grid simulation for exporting wind turbine set testing.   If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • LVRT domain grid simulation system Low-voltage Ride-through domain grid simulation system

    Low-voltage Ride-through Simulation System Features: 1. Low-voltage ride-through simulation system is able to faithfully simulate the various low-voltage faults of the power grid, including the grid voltage symmetrical dip and asymmetrical dip. 2. The dip curve is compliant with the regulations of the newest national standards, therein, the dip amplitude and dip duration of each stage can be set flexibly. As shown in the figure below: In the figure, the solid line is the contour of the work area of the turbine and the dashed line is the example of dip curve for actual test. If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • variable pitch servo driver 30kW Universal Variable Pitch DC Servo Driver

    Pitch Servo Drive Hopewind provides 7.5kW, 11kW, 15kW, 17kW, 23kW, 30kW and other specifications of the wind power pitch servo drives. The servo drive is designed for the wind power pitch control system, which can be equipped with DC servo motor, permanent magnet synchronous motor and AC asynchronous servo motor, and can adapt to the harsh vibration and temperature conditions in the hub. The drive meets the requirements of high performance pitch control with superior control precision and high response speed. It is suitable for more than 82 meters of the blade fast drive, and effectively prevents the runaway accidents caused by the lack of driving torque. If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Air-conditioning-cooling Doubly-fed Wind Turbine Inverter 2.0MW Air-conditioning-cooling Doubly-fed Wind Turbine Inverter

  • Wind Power Inverter Monitoring Software hopeInsight Wind Power Inverter Monitoring Software

    hopeInsightTM Monitoring Software hopeInsightTM monitoring software, which is commonly known as the background software, is suitable for all products of our company. The software has a large number of professional debugging functions, such as batch parameter setting, fault data download and waveform analysis, high speed oscilloscope and a large number of editing functions, etc. The software supports serial port or Ethernet, so the software is able to maintain converters through the serial communication, also in the central control room through the Ethernet. hopeInsightTM can be used for a single converter monitoring, also be used as a component of hopeViewTM. Taking the converter as an example, the working schematic diagram is as follows:

  • HIM Controller HIM Series Controller regulator monitor

    HIM Series Controller Hopewind wind power main control development platform, with full absorption and integration of domestic and foreign advanced technology and design ideas — high performance CPU, real time Linux operating system, distributed design and 100M high-speed internal bus, is a controller that can change the control strategy by programming or software configuration. Because the controller has the characteristics of easy programming, flexible expansion, fast communication, reliable performance and so on, it is suitable for the main controller development platform of wind power generation (single or double cabinet layout) and also for the development of control system in other industrial control fields. Integral Structure: Main control module, digital modules, analog modules, backboard components System Block Diagram: Performance Characteristics: 1.Support for real time wave recording 2.High performance ARM processor 3.Remote upgrade module 4.Strong anti-interference and anti-vibration 5.TF card, USB mass storage 6.Support C and ST language program development 7.Linux real-time kernel, support up to 10ms program execution cycle 8.Using EtherCAT backboard bus connection, fast and stable signal transmission 9.Providing rich signal interface, through the module configuration to fully meet the development and application of wind turbine master control If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • SVG Static Var Generator Universal SVG Static Var Generator

    SVG (Static Var Generator) Hopewind SVG is the perfect solution to the reactive power compensation and harmonic governance issues. The series covers the 10kV and 35kV two voltage levels, and the power level range of single unit is 1.0~10MVar. Products can be widely used in regional power grids, wind farms, photovoltaic power plants, metallurgy industry, electric arc furnaces, hoisters, coal mines and other fields, to stabilize the grid voltage of receiving end and improve the quality of power supply and transmission capacity. Performance Features: 1.With the ability to effectively compensate for the 2nd~13th harmonics 2.Continuous smooth adjustment, two-way reactive power compensation 3.Real time tracking, fast response(response time is less than 5ms) 4.With the three-phase active and reactive unbalanced phase-splitting compensation function 5.Both dynamic harmonic compensation function, and dynamic reactive power compensation 6.The voltage flicker suppression capability is strong, which can effectively control the fluctuation and flicker of grid 7.With strong power grid adaptability, highly adaptive to China’s various power operation conditions, so as to improve the reliability and utilization of power supply 8.High power density, small footprint, optimization of compact power modules, system layout and cooling system, thus further increasing the power density and reducing the area 9.Rich compensation functions, various control methods, support for the control modes from local, remote, scheduling system, support for compensation modes of reactive power setting, constant voltage, constant power factor and others 10.Rich monitoring and diagnostic capabilities, with event logging, fault recording, remote network access, fault processing wizard and other functions, providing complete technical support for operation status monitoring, field problem analysis and fault timely treatment If you want to know some information about our company,pls check our website: www.hopewindelectric.com

Copyright © Shenzhen Hopewind Electric Co., Ltd. All Rights Reserved.dyyseo.com

online service

service

online service