customer service hotline : 86-755-86026786

stock code:603063

Banner
products and solutions
3.0MW Full-Power Electrical Excitation wind energy conversion system 3.0MW Full-Power Electrical Excitation wind energy conversion system 3.0MW Full-Power Electrical Excitation wind energy conversion system 3.0MW Full-Power Electrical Excitation wind energy conversion system

3.0MW Full-Power Electrical Excitation wind energy conversion system



contact now

Full Power Electric Excitation Converter


Performance Features:
1. Wide adaptation:
Match two type fans, brushless electric excitation and direct excitation

2.Unique user customization:Power, signal, external loop and other interfaces can be customized according to users' needs
3. Compatible with permanent magnet and electrical excitation:The excitation module is built in the converter, and the overall size is in line with the permanent magnet full power converter
4. Excellent power quality:Leading control technology, that ensures the unit on/off grid with zero impact, and adjustable grid-side power factor
5. Great power grid adaptability:Effectively adapt to the weak power grid, and can adapt and suppress the harmonics and flicker. Meet the national standard for LVRT
6. Perfect system monitoring and fault diagnosis:hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTMnetwork monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power


If you want to know some information about our company,pls check our website: www.hopewindelectric.com

Operating Voltage 552V~759V
Operating Frequency (Grid-side) 47Hz~53Hz / 57Hz~63Hz
Grid-side Maximum Continuous Current 2930A
Grid-side Overload Current
10sec/6min
3229A
Generator-side Maximum
Continuous Current
3000A
Generator-side Overload Current
10sec/6min
3300A
Grid Voltage Harmonics (Tolerance) ≤5%
Grid Voltage Unbalance (Tolerance) ≤8%
Efficiency >97%
Noise <70dB
Operating Temperature Ambient Temperature: -30~50 The Coolant Temperature: 5~50 (Operating with derating at +45~+50);
Storage Temperature -40~70
Altitude Normal: ≤2000m Plateau Mode: 2000m~5000m
Cooling Type Liquid-cooling
Ingress Protection IP54
LVRT National standard and E.ON2006
Outline dimensions W*H*Dmm Size C


Size A: W*H*D=2000*2200*600; (Line-styled)

Size B: W*H*D=2910*2200*640; (Line-styled)

Size C: W*H*D=2200*2200*1300; (Back-to-back)

①Support running under 1.3 times of rated voltage

②Please consult Hopewind for the solutions of other frequency range

③Please consult Hopewind for the solutions of 4000m above

* Above ①②③ are common to the entire series of full-power converters



Related Product
  • Integrated wind turbine power inverter 3.0MW Liquid-cooling Full-power Integrated wind turbine power inverter

    Liquid-cooled Full-power Integrated Converter Performance Features: 1. Integrated structure design · Optimize the design of the outer pipeline to decrease the pipeline length. · The inlet and outlet water pipe are both on the bottom end of the cabinet, can effectively save the installation holes space. · The ingress protection of liquid-cooled machine and converter is the same as IP54, which is easy to use in harsh environment. · The liquid-cooled machine and the converter adopt an integral structure, compact structure, for the convenient transportation and hoisting. 2. Control integration · More accurate detection of water temperature and pressure of the inlet and outlet. · The liquid-cooled machine is controlled by the converter, without the need of external control, so the coordination logic is more excellent. The converter can respond to the abnormal condition of the liquid-cooled machine in time. 3. Maintenance integration · The operation and maintenance of the liquid-cooled system can be monitored by remote network monitoring system. · Unified maintenance by Hopewind, service responses and spare parts reserves are consistent with the converter. · The unified background monitoring software can real-time monitor the operating status of liquid-cooled machine and fault records, to realize the unified customer service inspections. If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Permanent Magnet wind energy converter 6MW Full Power Permanent Magnet wind energy converter

    Full Power Permanent Magnet Converter Performance Features: 1. Unique user customization:Power, signal, external loop and other interfaces can be customized according to users' needs 2. Excellent power quality:Leading control technology, that ensures the unit on/off grid with zero impact, and adjustable grid-side power factor 3. Great power grid adaptability:Effectively adapt to the weak power grid, and can adapt and suppress the harmonics and flicker. Meet the national standard for LVRT 4.Broad environmental adaptability:IP54 ingress protection, high reliability, suitable for high altitude, low temperature, salt fog and other harsh environment 5. Perfect system monitoring and fault diagnosis:hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTM network monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • 16-way Combiner Box 16-way Combiner Box

    (PowerSA-SUNio 16)

  •  Simplified VFD HV310 Simplified VFD frequency inverter

    HV310 Simplified Drive The HV310 drive is a simplified drive with V/F control and open loop vector control modes. Compared with HV300, the HV310 has no keypad, fewer I/O terminals, and simpler software. It is designed for use in simple applications that do not require direct parameter editing on the drive. This form of simplified drive may be appropriate for controlling the following plastic machines, small pumps, printing machines, blowers, centrifuges, low power textile machines and wood and metal cutting machines. Features: 1. High performance open loop vector control. 2. Advanced VF control. 3. Excellent S-ramp acceleration and deceleration profiling. 4. Fast autotune. 5. Dual CPU processor. 6. Using the latest PIM (power integrated module). 7. Standard built-in brake unit. 8. Internal EMC filter with breakpoint design to allow convenient switching by user. 9. Sealed circuit board for better environment immunity. 10. Flexible digital input terminals with user configurable polarity. 11. Reference (current) loose, trip or not could be selected. 12. Thermal model design, real-time calculation IGBT junction temperature to make sure IGBT working reliable. 13. Wireless fan block design, easy to replace. 14. Simple function blocks, easy to do the parameter setup. 15. Run at reduced capacity with single phase input in the event of loss of 3 phase input. 16. AVR (Automatic Voltage Regulation) keeps output voltage stable during input voltage transients. 17. Switching frequency automatic adjustment. 18. Catch spinning motor function. 19. DC injection brake. 20. Skip frequency function to avoid undesirable resonant speeds. 21. Powerful electronic potentiometer function, adjust reference conveniently. 22. Standard MODBUS-RTU. 23. Comprehensive protection function: Fast protection for output shortage, over current, over load, over voltage, under voltage, phase loss, over heat (heatsink and junction), external trip, etc. 24. 4 preset speeds (decided by control terminals). If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • variable frequency drive VFD HD2000 Modular variable frequency drive VFD

    HD2000 Modular Control Drive Product Introduction: 1. Hopewind developed the HD2000 independently and holds 21 patents relating to the technology. 2. Complete product series, there are 2 kinds of cooling method products: air-cooling and liquid-cooling. The power range is from 45kW to 4800kW, and supports 3 kinds of control method: V/F, SVC and FVC. 3. Modular Design. Rectifier Unit, Motor Drive Unit, Control Unit, Brake Unit and other units can be configured and joined to meet unique customer requirements. 4. Integrated Multi-axis Motion Control. Fit for integrated, multifunctional and multi-axis control for complex industrial control process. 5. Programmable Process Profiles. Besides standard software, control unit provides 3 programmable software blocks to realize the specific process required by the customers. 6. Can be seamlessly connected with the principal machine, besides supports mainstream communication protocols – Profibus, CANopen, ModBus, and support TCP/IP, CC-Link, DeviceNet as well. 7. Excellent performance of hovering at zero speed, controlling the motor hovering at zero speed with no shake and slip. 8. Tiny torque response time. Under torque control mode, 2ms current response time when added the rated torque in sudden. 9. Master/Slave Load Balancing Control.  Master/slave motion control, completely static load balance and dynamic load balance in milliseconds can be implemented with flexible parameter interconnection. 10. Four-quadrant Operation. High capacity of regenerative feedback through PWM controlled rectification and common DC bus. 11. Strong Adaptability. Designed for operation on low power quality grid. Tolerant of frequent interruptions, spikes and surges. 12. Centralized Control & Distributed Operation, Higher Reliability through Redundancy. 13. Redundancy Design. Modules may be paralleled to achieve desired level of capacity and redundancy. 14. High Compatibility. Compatible with asynchronous motors and synchronous motors via automatic motor identification. 15. Easy Maintenance. Modular design and front access results in low mean time to repair (MTTR). 16. Could corollary with hopeCloud dada management system, to achieve zero-distance monitoring, provide advanced data analysis and diagnostic services for customers, reducing unplanned downtime. 17. IGBT protection via smart junction temperature prediction algorithm. Thermal model design, precise IGBT junction temperature prediction at stable or transient overload operation to maximize load capacity and ensure reliability. 18. Soft turn-off technology for IGBT shoot through. If shoot through occurs on the system, the soft turn-off technology will make sure the power devices shutoff without deviation from the safe V-operation region to prevent damage. 19. Complete product design and test platform, IGBT stability design platform, vibration test, hovering test, high/low temperature test and various motor test platform. If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Wind Converter Internet Monitoring System hopeView Wind Converter Internet Monitoring System

    hopeViewTM Converter Monitoring System hopeViewTM Converter Monitoring System, developed by Hopewind Electric with patented technology, can easily integrate all converters in the wind farm and quickly form a dedicated monitoring network. It can be installed in the Centre Control Room to implement real-time monitoring of the operation status,detailed parameters and fault alarm information of all converters in the wind farm. It can also enable the user to perform other practical functions such as observing parameter waveforms or trend curves online, and downloading event logs, fault logs, and fault records, etc. hopeViewTM Converter Monitoring System can help wind farm owners to improve the efficiency of operation and maintenance of the converters and wind turbines, even the whole wind power plant. Therefore it will eventually reduce the operation and maintenance cost of the wind farm.

  • 1000kW/1250kW Centralized PV Grid-connected Inverter 1000kW/1250kW Centralized PV Grid-connected Inverter

    (without isolation transformer)

Copyright © Shenzhen Hopewind Electric Co., Ltd. All Rights Reserved.dyyseo.com

online service

service

online service