Customer service hotline : 86-755-86026786

Stock code:603063

Banner
products and solutions
8.0MW Containerised Integrated Medium Voltage Wind Energy Inverter

8.0MW Containerised Integrated Medium Voltage Wind Energy Inverter

contact now

Container-type Integrated Medium Voltage Wind Power Converter

Performance Features:

1.Using standard containers, to facilitate the standard design of the outer platform of the tower
2.Placed in the tower outer platform, assist the optimization of tower design to cost saving
3.Great sealing performance, with high Ingress Protection of the converter itself, to ensure the safe operation of the converter
4.Perfect system monitoring and fault diagnosis: hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTM network monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power


If you want to know some information about our company,pls check our website: www.hopewindelectric.com

Grid-side Operating Voltage  3000V
Grid-side Operating Frequency  47Hz~53Hz / 57Hz~63Hz
Grid-side Rated Current  1750A
Generator-side Operating Voltage  3104V
Generator-side Rated Current  1750A
Grid Voltage Harmonic Endurance 5%
Grid Voltage Unbalance Endurance 8%
Efficiency ≥98%
Noise ≤80dB
Operating Temperature -10~40
Storage Temperature -20~60
Altitude ≤1000m
Cooling Type  Liquid-cooling
Ingress Protection IP54
LVRT National standard
Outline dimensions W*H*Dmm 36058*2896*2900Include grid-side incoming line switchgear cabinet

Related Product
  • Standard Cabinet Type wind turbine power inverter 8.0MW Standard Cabinet Type Medium Voltage wind turbine power inverter

    Standard Cabinet Type Medium Voltage Wind Power Converter Performance Features: 1.Less cable, engineering installation facilities 2.High power density, up to 7.0MW 3.Adopt diode-clamp three-level technology 4.Small size, good compatibility and high reliability 5.High equivalent switching frequency, small harmonics, and great dynamic response 6.The switching devices with the same voltage withstand level can be used for medium and high voltage large capacity converters 7.Suitable for high-power wind turbine units, especially the sea-based high-power units 8.Hopewind can also provide medium pressure container-type wind power converter according to customer demands with higher level of protection 9.Perfect system monitoring and fault diagnosis: hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTM network monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Combiner Box of 8, 12,16 ways Combiner Box of 8, 12,16 ways

     (PowerSA-SUNio 8)

  • Wind Energy Converter Inspection assistant hopeScan Wind Energy Converter Inspection assistant

    hopeScanTM Patrol Assistant hopeScanTM patrol assistant, a monitoring software applicable to mobile intelligent devices, can access the converter through WIFI, for viewing information and obtaining fault data. The Assistant can also upload the data downloaded from the converters to the hopeCloudTM cloud server to create maintenance lists, access to the server for viewing the maintenance lists and participate in the converter maintenances. If you want to know some information about our company,pls check our website: www.hopewindelectric.com The working schematic diagram is as follows:

  • Liquid-cooling Wind Power Converter 5.0MW Liquid-cooling Doubly-fed (DFIG) Wind Power Converter

  • 500kW/630kW/800kW Centralized PV Grid-connected Inverter 500kW/630kW/800kW Centralized PV Grid-connected Inverter

    (without isolation transformer)

  • Utility PV Inverter Utility PV Inverter

    (40K/50K/70K/80K/100K)

  • variable frequency drive VFD HD2000 Modular variable frequency drive VFD

    HD2000 Modular Control Drive Product Introduction: 1. Hopewind developed the HD2000 independently and holds 21 patents relating to the technology. 2. Complete product series, there are 2 kinds of cooling method products: air-cooling and liquid-cooling. The power range is from 45kW to 4800kW, and supports 3 kinds of control method: V/F, SVC and FVC. 3. Modular Design. Rectifier Unit, Motor Drive Unit, Control Unit, Brake Unit and other units can be configured and joined to meet unique customer requirements. 4. Integrated Multi-axis Motion Control. Fit for integrated, multifunctional and multi-axis control for complex industrial control process. 5. Programmable Process Profiles. Besides standard software, control unit provides 3 programmable software blocks to realize the specific process required by the customers. 6. Can be seamlessly connected with the principal machine, besides supports mainstream communication protocols – Profibus, CANopen, ModBus, and support TCP/IP, CC-Link, DeviceNet as well. 7. Excellent performance of hovering at zero speed, controlling the motor hovering at zero speed with no shake and slip. 8. Tiny torque response time. Under torque control mode, 2ms current response time when added the rated torque in sudden. 9. Master/Slave Load Balancing Control.  Master/slave motion control, completely static load balance and dynamic load balance in milliseconds can be implemented with flexible parameter interconnection. 10. Four-quadrant Operation. High capacity of regenerative feedback through PWM controlled rectification and common DC bus. 11. Strong Adaptability. Designed for operation on low power quality grid. Tolerant of frequent interruptions, spikes and surges. 12. Centralized Control & Distributed Operation, Higher Reliability through Redundancy. 13. Redundancy Design. Modules may be paralleled to achieve desired level of capacity and redundancy. 14. High Compatibility. Compatible with asynchronous motors and synchronous motors via automatic motor identification. 15. Easy Maintenance. Modular design and front access results in low mean time to repair (MTTR). 16. Could corollary with hopeCloud dada management system, to achieve zero-distance monitoring, provide advanced data analysis and diagnostic services for customers, reducing unplanned downtime. 17. IGBT protection via smart junction temperature prediction algorithm. Thermal model design, precise IGBT junction temperature prediction at stable or transient overload operation to maximize load capacity and ensure reliability. 18. Soft turn-off technology for IGBT shoot through. If shoot through occurs on the system, the soft turn-off technology will make sure the power devices shutoff without deviation from the safe V-operation region to prevent damage. 19. Complete product design and test platform, IGBT stability design platform, vibration test, hovering test, high/low temperature test and various motor test platform. If you want to know some information about our company,pls check our website: www.hopewindelectric.com

Copyright © Shenzhen Hopewind Electric Co., Ltd. All Rights Reserved.dyyseo.com

online service

service

online service