customer service hotline : 86-755-86026786

stock code:603063

Banner
products and solutions
8.0MW Standard Cabinet Type Medium Voltage wind turbine power inverter 8.0MW Standard Cabinet Type Medium Voltage wind turbine power inverter

8.0MW Standard Cabinet Type Medium Voltage wind turbine power inverter

contact now

Standard Cabinet Type Medium Voltage Wind Power Converter

Performance Features:

1.Less cable, engineering installation facilities
2.High power density, up to 7.0MW
3.Adopt diode-clamp three-level technology
4.Small size, good compatibility and high reliability
5.High equivalent switching frequency, small harmonics, and great dynamic response
6.The switching devices with the same voltage withstand level can be used for medium and high voltage large capacity converters
7.Suitable for high-power wind turbine units, especially the sea-based high-power units
8.Hopewind can also provide medium pressure container-type wind power converter according to customer demands with higher level of protection
9.Perfect system monitoring and fault diagnosis: hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTM network monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power


If you want to know some information about our company,pls check our website: www.hopewindelectric.com

Grid-side Operating Voltage  3000V
Grid-side Operating Frequency  47Hz~53Hz / 57Hz~63Hz
Grid-side Rated Current  1750A
Generator-side Operating Voltage  3104V
Generator-side Rated Current  1750A
Grid Voltage Harmonic Endurance 5%
Grid Voltage Unbalance Endurance 8%
Efficiency ≥98%
Noise ≤80dB
Operating Temperature -10~40
Storage Temperature -20~60
Altitude ≤1000m
Cooling Type  Liquid-cooling
Ingress Protection IP54
LVRT National standard
Outline dimensions W*H*Dmm 3300*2200*1200(power cabinet)+
3000*2200*1000(filter cabinet)

Related Product
  • Containerised Integrated Wind Energy Inverter 8.0MW Containerised Integrated Medium Voltage Wind Energy Inverter

    Container-type Integrated Medium Voltage Wind Power Converter Performance Features: 1.Using standard containers, to facilitate the standard design of the outer platform of the tower 2.Placed in the tower outer platform, assist the optimization of tower design to cost saving 3.Great sealing performance, with high Ingress Protection of the converter itself, to ensure the safe operation of the converter 4.Perfect system monitoring and fault diagnosis: hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTM network monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Utility PV Inverter Utility PV Inverter

    (40K/50K/70K/80K/100K)

  • SVG Static Var Generator Universal SVG Static Var Generator

    SVG (Static Var Generator) Hopewind SVG is the perfect solution to the reactive power compensation and harmonic governance issues. The series covers the 10kV and 35kV two voltage levels, and the power level range of single unit is 1.0~10MVar. Products can be widely used in regional power grids, wind farms, photovoltaic power plants, metallurgy industry, electric arc furnaces, hoisters, coal mines and other fields, to stabilize the grid voltage of receiving end and improve the quality of power supply and transmission capacity. Performance Features: 1.With the ability to effectively compensate for the 2nd~13th harmonics 2.Continuous smooth adjustment, two-way reactive power compensation 3.Real time tracking, fast response(response time is less than 5ms) 4.With the three-phase active and reactive unbalanced phase-splitting compensation function 5.Both dynamic harmonic compensation function, and dynamic reactive power compensation 6.The voltage flicker suppression capability is strong, which can effectively control the fluctuation and flicker of grid 7.With strong power grid adaptability, highly adaptive to China’s various power operation conditions, so as to improve the reliability and utilization of power supply 8.High power density, small footprint, optimization of compact power modules, system layout and cooling system, thus further increasing the power density and reducing the area 9.Rich compensation functions, various control methods, support for the control modes from local, remote, scheduling system, support for compensation modes of reactive power setting, constant voltage, constant power factor and others 10.Rich monitoring and diagnostic capabilities, with event logging, fault recording, remote network access, fault processing wizard and other functions, providing complete technical support for operation status monitoring, field problem analysis and fault timely treatment If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • General Purpose variable speed drive HV300 General Purpose variable speed drive

    HV300 General Purpose Drive The HV300 family produced by Hopewind Electric is a general purpose vector drive with V/F control and open-loop control mode. Closed loop control is also possible with a built-in PID function. This type of drive is intended for use in applications that do not require extremely high control accuracy such as those typically encountered in HVAC, milling, compressors, centrifuges, CNC lathes, drilling, grinding, and pumping operations. The HV300 also has a built in textile logic to support the unique demands of equipment in this industry sector. Features: 1. Full international voltage ranges. 22kW and below models have a plastic case, 22kW and above models with sheet metal case. 2. Internal C3 EMC filter for whole family. The filter can be fitted or unfitted by the link. 3. Features latest generation IGBT (max. junction temperature 175℃). 4. Thermal model design, real-time calculation IGBT junction temperature to make sure IGBT working reliable. 5. Internal DC reactor for 5.5kW and above models. 6. Independent airflow channel to improve dust & dirt immunity. 7. Wireless fan block design for 7.5kW and below models for easy toolless replacement. 8. Internal brake unit 22kW and below, optional for 30kW and above. 9. Wiring guards prevent accidental contact. 10. Built-in PLC or control terminal for up to 16 preset speeds. 11. Flexible I/O interface for DIY functionality. 12. Common DC -bus control available for full series. 13. High adaptability for textile industry with built-in textile logic and length control function. 14. Onboard PID control for closed loop inputs of temperature, pressure and flow signals.  15. 2 sets of motor parameters can be saved, allowing multiple loads to be powered from one single drive. 16. In the event of a power interruption, the drive will detect the speed and rotational direction of the motor, and automatically match output frequency to restart normal operation smoothly. 17. Rapid 1 second user control input sampling. 18. Drive maintains functionality during input power interruptions by momentary reverse powering its own controls. 19. User definable VF curve according to the torque characteristic. If you want to know some information about our company,pls check our website: www.hopewindelectric.com If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Pitch Control System Pitch Control System Variable oar control system

    Pitch Control System Performance Features: 1.Position steady state error <0.05 degree 2.Normal pitch follower deviation <1 degree 3.Paddle synchronous angle deviation <0.5 degree 4.Suitable for 1MW~6MW unit 5.The operating temperature of ultra-low temperature type can be as low as -40℃. 6.The operating altitude of ultra-high altitude type can reach 4000 meters. 7.With the double security protection function of software and hardware 8.Pitch control, position control mode and speed control mod 9.Provide three cabinets, four cabinets, six cabinets or seven cabinet system according to the needs of users 10.With excellent HVRT and LVRT capacity 11.With CANopen, ProfibusDP, RS485 and other communication interface 12.The software part has the functions of real-time fault, history fault record and fault snapshot. 13.The software part has a easy and direct human-machine interaction interface, and has the perfect parameter management function, manual operation function and super capacitor test function. If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Dry-type Transformer Dry-type Transformer

    (1.0MW~2.5MW)

  • 500kW/630kW/800kW Centralized PV Grid-connected Inverter 500kW/630kW/800kW Centralized PV Grid-connected Inverter

    (without isolation transformer)

Copyright © Shenzhen Hopewind Electric Co., Ltd. All Rights Reserved.dyyseo.com

online service

service

online service