customer service hotline : 86-755-86026786

stock code:603063

Banner
products and solutions
hopeGate Wind Power converter Intelligent Maintenance Acquisition Unit Collector

hopeGate Wind Power converter Intelligent Maintenance Acquisition Unit Collector

contact now

hopeGateTM Intelligent Maintenance Acquisition Unit

hopeGateTM Intelligent Maintenance Acquisition Unit is used in control system of wind energy or solar energy for protocol conversion and enable the control system to be compatible with various protocols. At the same time, hopeGateTM provide a abundant communication conversion interface to realize network control easily.


Performance features:
1. Support C, C++ language programming for end users.
2. Support TCP/IP protocol stack, CANOpen protocol, Modbus protocol,etc.
3. Provide rich communication interfaces.


If you want to know some information about our company,pls check our website: www.hopewindelectric.com
Processor Platform I.MX257 10
Operation System
and Software
Operation System 166.6
File System 2nd13th
Remote Access 0.99Within compensation capacity range
Protocol 5ms
Max. Power < 6W Air-cooling
Operating Temperature (-30 ~ +50) 99%Rated operation
Storage Temperature (-40 ~ +70) IP20
Altitude 0 ~ 4000m -15℃~55
Mean Time To Failure > 18000 hours -40℃~70
Supported Communication
 Interface
Ethernet 10/100M adaptive Ethernet interface
USB USB 2.0 host
Fiber For converter/inverter's commissioning
FX  10/100M adaptive Fiber Ethernet interface
ProfiBus ProfiBus DP Slave interface, baud rate up to 12Mbps
CAN CAN interface, baud rate up to 1Mbps
RS485 RS485 interface, baud rate up to 921600bps
Console USB device interface console, baud rate 115200bps
WiFi Maximum speed 150Mbps, communication distance 50m
 (open field without blocking)

Related Product
  • Wind Power Inverter Monitoring Software hopeInsight Wind Power Inverter Monitoring Software

    hopeInsightTM Monitoring Software hopeInsightTM monitoring software, which is commonly known as the background software, is suitable for all products of our company. The software has a large number of professional debugging functions, such as batch parameter setting, fault data download and waveform analysis, high speed oscilloscope and a large number of editing functions, etc. The software supports serial port or Ethernet, so the software is able to maintain converters through the serial communication, also in the central control room through the Ethernet. hopeInsightTM can be used for a single converter monitoring, also be used as a component of hopeViewTM. Taking the converter as an example, the working schematic diagram is as follows:

  • Wind Energy Converter Inspection assistant hopeScan Wind Energy Converter Inspection assistant

    hopeScanTM Patrol Assistant hopeScanTM patrol assistant, a monitoring software applicable to mobile intelligent devices, can access the converter through WIFI, for viewing information and obtaining fault data. The Assistant can also upload the data downloaded from the converters to the hopeCloudTM cloud server to create maintenance lists, access to the server for viewing the maintenance lists and participate in the converter maintenances. If you want to know some information about our company,pls check our website: www.hopewindelectric.com The working schematic diagram is as follows:

  • Wind Power Converter Intelligent Maintenance Platform Test-hopeCloud Wind Power Converter Intelligent Maintenance Platform

    Wind Power Converter Intelligent Maintenance Platform

  • Utility PV Inverter Utility PV Inverter

    (40K/50K/70K/80K/100K)

  • Wide Frequency Domain Grid Simulation System 7.5MW Wide Frequency Domain Grid Simulation System

    7.5MW Wide Frequency Domain Grid Simulation System Features: 1. Independent control of three phase voltage and high overload capacity, assuring simulation of various grid variation and low voltage faults. 2. 32-bit DSP-based real time and intelligent control, with high accuracy of waveform and slew rate control, excellent steady and dynamic performance. 3. Simple and intuitive HMI, providing higher operation efficiency. 4. Support 60Hz grid simulation for exporting wind turbine set testing.   If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Permanent Magnet wind energy converter 6MW Full Power Permanent Magnet wind energy converter

    Full Power Permanent Magnet Converter Performance Features: 1. Unique user customization:Power, signal, external loop and other interfaces can be customized according to users' needs 2. Excellent power quality:Leading control technology, that ensures the unit on/off grid with zero impact, and adjustable grid-side power factor 3. Great power grid adaptability:Effectively adapt to the weak power grid, and can adapt and suppress the harmonics and flicker. Meet the national standard for LVRT 4.Broad environmental adaptability:IP54 ingress protection, high reliability, suitable for high altitude, low temperature, salt fog and other harsh environment 5. Perfect system monitoring and fault diagnosis:hopeInsight monitoring software can realize remote monitoring and fault diagnosis of single converter, hopeViewTM network monitoring system can realize networking and monitoring of converters in the wind field and remote scheduling of converters’ active and reactive power If you want to know some information about our company,pls check our website: www.hopewindelectric.com

  • Single-inverter Container Single-inverter Container

     (Single Inverter)

Copyright © Shenzhen Hopewind Electric Co., Ltd. All Rights Reserved.dyyseo.com

online service

service

online service